Butterfly Valves Castings introduction Valve body is with simple structure, but require high pressure resistance, process demand is very strict; usually need to set pouring system in horizontal mould joints, in order to achieve sequential solidification and ensure effective complement from top...
Butterfly Valves Castings introduction
Valve body is with simple structure, but require high pressure resistance, process demand is very strict; usually need to set pouring system in horizontal mould joints, in order to achieve sequential solidification and ensure effective complement from top to bottom.
Material: Carbon (1.6220)
Standard: DIN EN 10213
Casting process: alkaline phenolic resins
Size：14~ 36 inches
Heat treatment method: NBK
Surface treatments: shot blasting and polishing
Tensile strength: 560MPa
Yield strength: 385MPa
Export countries：Netherlands, Australia, Germany, Japan.
Our advantage products: all kinds of Valve castings
◆ We are a innovation-driven company, we have five patents and another 13 patents will be expected to get in short months.
◆ we are willing to develop all new material only if it’s required in application.
◆ Advantage technology in composition control, especially super low carton steel, stainless steel and duplex stainless steel.
◆ We cast very good surface of thin-wall castings, which is normally not easy to control for sand castings, but we made suitable technology and are able to guarantee smooth no-defect surface.
◆ Crack is fatal flaw for pressure resistant container. We can make sure no crack inside and outside of the pump and valve castings, and a good pressure-resistant performance.
◆ All our technology innovation only for one aim--- the best quality, even that means a higher cost and lower production rate.
1)The delivery time and the package can be controlled according to the customers' requirement completely.
2)we will produce the products seriously according to the drawings, and make sure all the products is suitable for the customers.
3)We will communicate with the customers all the time about the products, we will send the picture.
We look forward to having the opportunity of providing services for you. Warmly welcome all friends and partners to visit and guide and negotiate the business.
Wuxi Lingtong Casting Co.,Ltd.
Attn: Ms. Vivian
Tel: +86 510 85990876
Cell: +86 13861777146 18360922650