Water Valve Impeller Castings Sewage Pump Impeller Submersible Pump Castings

High Quality Water Valve Impeller Sewage Pump Impeller Submersible Pump Castings,Lingtong Casting have exported Stertil(Holland), LKL(Holland), GE(USA), CAT(USA), RHI(USA), WKM(Japan), UGL(Australia), ABS(Australia), KTH(Australia), Supplylink(Australia), FLOWSERVE(USA), Ruhrpumpen,etc.

Description

Pump Casting Description 

Material: Stainless steel (07Cr19Ni9)

Standard: GB/T 2100-2002

Casting process: Sand casting

Weight: 83 KGS

Min. wall thickness: 13mm

Heat treatment method: solution treatment

Surface treatments:  shot blasting

Technical Key Points

Ø Control the usage rate of recycled material. When melted in the atmosphere, most of the easily oxidized elements in the material are present in the form of inclusions. Therefore, the amount of inclusions to be taken into account and the usage of recycled material must be controlled. for the stainless steel guide vane, the provisions of the return material amount should be not more than 15%.

Ø Blowing argon to the steel to reduce inclusions. Take 2t ladle as example, when tapping the molten steel, gas pressure should be strictly controlled below 0.1Mpa to prevent the new Oxygen absorption effect, which may be caused by Violent turbulence if the blowing gas is with high pressure. Argon blowing process can effectively reduce oxygen content of the steel by 10% -20%, the effect is very obvious. after tapping of the high temperature molten steel, the steel must be sedated for 5 minutes, thus the gas solubility in steel will reduce and some gas will escape from the steel, carrying the inclusion inside rise to the surface of the steel, thus the steel are cleaned.

Our Customers


产品说明-242451.png                    产品说明-242452.png

   产品说明-242454.png


Quality Assurance

Ø Strict contract auditing invloved all departments to assure the feasibility of each order.

Ø Process design and validation before bulk production.

Ø Strictly control on all raw and auxiliary materials, All raw materials reach the world advanced level.

Ø Qualified WPS and professional welders guarantee welding quality.

Ø 100% inspection of finished sprouts before shipment.

Ø Advanced and complete testing and inspection equipment: NDT, metal Microscope, impact tester, hardness tester.

 灵通证书拼图.jpg

Our Service

Ø We provide free technical service about casting parts and application issues.

Ø Free on-site touring and introduction of our factory.

Ø We can guarantee on-time delivery of samples and goods.

Ø Close follow-up of all orders by special person and keep customers informed timely.

our service.jpg

Just contact us for detailed information without hesitate, I will reply you quickly.


Feedback

Products List
Contact Us

Tel: +8613861777146
+8615852600207
Fax: 86-510-85992265
E-mail: Vivian@ltzz.com