Export Turbine Impeller, Radial Impeller, Impeller Castings

Material: Stainless steel (17-4PH)

Standard: ASTM A564

Casting process:  alkaline phenolic resin casting

Weight: 304KGS

Min. wall thickness: 8mm

Description

Export turbine impeller, radial impeller, impeller castings description

Material: Stainless steel (17-4PH)

Standard: ASTM A564

Casting process:  alkaline phenolic resin casting

Weight: 304KGS

Min. wall thickness: 8mm

Heat treatment method: solution treatment and aging treatment

Surface treatments:  shot blasting

Chemical Composition:

C:0.052  

Si:0.63

Mn:0.67

S:0.011

P:0.028

Cr:17.1

Ni:4.1

Cu:3.7

Nb:0.22

Mechanical property:

Tensile strength: 1400MPa

Yield strength: 1250MPa

Elongation: 12%

Reduction of area: 43%

Hardness: 42HRC

Tolerance grade: CT9

Application: pump, valve, impeller, power facilities, Construction Tools, Oil and gas system, Agriculture Machinery, Firefighting Equipment, Metallurgical Equipment, Shipyard, mining equipment parts.


Technical key points:

Ø To take special process protection measures: cavity argon blow treatment, that is, before pouring, filled in the cavity with inert gas argon quickly , since argon is heavier then the air, it won’t escape in short time and form a "vacuum" area, which will ensure the molten steel always under isolate protection from secondary oxidation, thus prevent the steel from regeneration inclusions.

Ø  Apply bottom injection open gating system, set the section area ratio of the pouring system as:

                         ∑A vertical:∑A horizontal:∑A inner =1.0:(0.8-0.9):(1.1-1.2)

Inner runner section area ∑A inner=K产品说明-262115.png  K-flow rate,take value 0.78  G- metal liquid total weight(Kg)

Ø  Pouring should be fast, first calculate the pouring time, apply plunger type leakage bag to pour in stipulated time, this process are with good slag stopping function, at the same time pouring pressure is increased. Pouring speed must be controlled to be full stream and flow into the cavity fast, till pouring gate be filled up.

设备8.jpg


Parts of our customers:

            产品说明-262542.png                产品说明-262543.png

   产品说明-262545.png        产品说明-262546.png

                    产品说明-262548.png               产品说明-262549.png


FAQ

1. What’s the minimum wall thickness of the castings you produce?

  A: The minimum wall thickness of the castings we produce is 8mm.

2. What’s the maximum weight of castings you can produce?

  A: The maximum weight of castings we can produce is 1.8 tons.

3. Can you list the smelting equipment of your company?

  A: We have 3 models of medium-frequency induction furnaces: 0.5 tons, 2 tons and 3 tons.

4. Which kinds of NDT methods that your company can provide?

  A: The NDT we provide are PT, MT, UT and RT.

5. Which grade of radiographic inspection can you reach?

  A: We can reach Grade 2.

6. Can you guarantee the traceability of your products?

  A: Regular products: On-site inspection record and FG Test report will be kept more than 3 years

Important products:On-site inspection record and FG Test report will be kept more than 5 years , applying processing card system, and make sure one card for each piece, thus to keep each piece of products are traceable.

 

Contact us:

Wuxi Lingtong Casting Co.,Ltd.

Attn: Ms. Vivian Wang

Email: vivian@ltzz.com

Tel: +86 510 85990876  

Cell: +86 13861777146 15852600207

Whatsapp:+86 15852600207

Skype: Vivian_wlh

Web: www.pump-casting.com

Scan me to add my Wechat:产品说明-264382.png


Related Products

Feedback

Products List
Contact Us

Tel: +8618360922650
Fax: 86-510-85992265
E-mail: Vivian@ltzz.com