Car Parts And Sus 304 Casting

Car Parts And Sus 304 Casting

Car parts and sus 304 casting Stainless steel precision sus 304 casting using a wax mold → do sand mold → liquid material filling process. Can be made according to different wax models of changing products. Description 1, according to different shapes of products to do mold. Mold points up and...

Description

Car parts and sus 304 casting

Stainless steel precision sus 304 casting using a wax mold → do sand mold → liquid material filling process. Can be made according to different wax models of changing products.

 

Description

1, according to different shapes of products to do mold. Mold points up and down die mode, through the car, planing, milling, etching, EDM and other integrated processes to complete. The shape of the pit is the same as that of the product. Because the wax mold is mainly used for industrial wax pressure type, so the choice of melting point is not high, the hardness is not high, lower requirements, cheaper prices, lighter weight aluminum alloy mold.

2, the use of aluminum mold to produce a large number of industrial wax solid core model. Under normal circumstances an industrial wax solid core model can only correspond to a rough product.

3, the wax mold around the amount of refinement, to the burr after a number of single wax mold (also known as group tree) prepared in advance of the die, the die is also produced by wax mold industrial wax Core model.

4, will have been fixed in the die on a number of wax mold coated with industrial glue evenly spray the upper layer of fine sand (a refractory sand, high temperature, usually with the silicon sand). The sand particles are small, very fine, so as to ensure that the final blank surface as smooth as possible.

5, at the set room temperature (or temperature) under the spray layer of fine sand wax mold naturally dry, but can not affect the shape of the internal wax mold changes, the natural drying time depends on the complexity of the product itself, the general casting Of the dry time about 5-8 hours or so.

6, sub-sand spray and natural air-dried, in the wax mold surface to continue on the industrial glue (silicon slurry), and sprayed on the second layer of sand, the second layer of sand particles than the size of the sand before the large, To the rough Spray the second layer of sand is also set at constant temperature so that the wax mold naturally dry.

 

COMPANY PROFILE

Lingtong is a professional engaged in the production of stainless steel curtain wall accessories, flat series, embedded board, angle code series, export series of products such as professional production and processing companies, have a complete and scientific quality management system. The factory has a rigorous management mechanism, improve the quality assurance, leading production equipment, strong technical force, a large number of professionals, convenient delivery methods, as well as a wide range of social credibility.

image005.jpg 

QUALITY ASSURANCCE

Ø Strict contract auditing invloved all departments to assure the feasibility of each order.

Ø Process design and validation before bulk production.

Ø Strictly control on all raw and auxiliary materials, All raw materials reach the world advanced level.

Ø On-site inspection to all processes, inspection record keep traceable for 3 years.

Ø All inspectors are skilled with international certificates.

Ø Qualified WPS and professional welders guarantee welding quality.

Ø 100% inspection of finished sprouts before shipment.

Ø Advanced and complete testing and inspection equipment: NDT, metal Microscope, impact tester, hardness tester...

Ø Regular training for inspection staff

321388.jpg 

FAQ

1.What information do you need if I want to get a quotation?

A: We need to know the material code, casting drawing and machining drawing with specification included.

2. What is the delivery time of pattern, casting parts and machining finished parts?

A: In general, pattern making time is 20-40 days base on the design of the parts, sample making time is 20-30 days, machining finished parts lead time is 40-60 days. The lead time will vary base one different design and weight of the parts, please contact us for details.

3. Which inspection reports you can provide?

A: We Provide dimensional inspection report,  chemical composition inspection report, physical property inspection report, heat treatment report, NDT flaw detection report,  according to customer demand.

4. What kinds of material you can produce?

A:The dominant material we cast is stainless steel, duplex stainless steel, carbon steel, ductile cast iron, aluminum, copper, bronze, brass and alloy metal etc. etc.  


Hot Tags: car parts and sus 304 casting, manufacturers, suppliers, price

Related Products

Feedback

Products List
Contact Us

Tel: +8618360922650
Fax: 86-510-85992265
E-mail: Vivian@ltzz.com