Stainless Steel Mixing Paddle Casting Parts

Heat resistant steel cast i ntroduction Material: Stainless steel (304) Standard: ASTM Casting process: alkaline phenolic resins Weight: 580KGS Heat treatment method: high temperature normalizing treatment and tempering Surface treatments: shot blasting and polishing Chemical Composition:...

Description

Heat resistant steel cast introduction

Material: Stainless steel (304)

Standard: ASTM

Casting process:  alkaline phenolic resins

Weight: 580KGS

Heat treatment method: high temperature normalizing treatment and tempering

Surface treatments: shot blasting and polishing

Chemical Composition:

C:0.047 

Si: 0.56 

Mn:0.8

Cu:19.92  

S:0.012

P:0.022

Ni:8.15

Cr:13.1

 Mechanical property:

Tensile strength: 495MPa

Yield strength: 178MPa

Elongation: 42%

 Tolerance grade: CT9

Application: food, chemical, industry, Oil.

Technical key points:

u Take effective measures to reduce the casting temperature to eliminate crack defects, at the same time reducing the temperature drop of molten steel to ensure the filling capacity of steel. Main technical measures: one is to directly reduce the casting temperature, the original pouring temperature of 1600 ℃ -1610 ℃, and now strictly control the temperature at 1570℃ -1580 ℃. Second, to reduce the temperature drop of molten steel. After the mold are assembled, blow heat wind 150 ℃ -200 ℃ to the cavities for 60 min-90min, and stop blowing 5min before pouring.

u Pouring should be fast, first calculate the pouring time, apply plunger type leakage bag to pour in stipulated time, this process are with good slag stopping function, at the same time pouring pressure is increased. Pouring speed must be controlled to be full stream and flow into the cavity fast, till pouring gate be filled up.

 

Our customers:

customer(001).jpg 

TECHNOLOGY ADVANTAGES 

Ø We are a innovation-driven company, we have five patents and another 13 patents will be expected to get in short months.

Ø we are willing to develop all new material only if it’s required in application.

Ø Advantage technology in composition control, especially super low carton steel, stainless steel and duplex stainless steel.

Ø We cast very good surface of thin-wall castings, which is normally not easy to control for sand castings, but we made suitable technology and are able to guarantee smooth no-defect surface.

Ø Crack is fatal flaw for pressure resistant container. We can make sure no crack inside and outside of the pump and valve castings, and a good pressure-resistant performance.

Ø All our technology innovation only for one aim--- the best quality, even that means a higher cost and lower production rate.

 

OUR SERVICE

Ø We provide free technical service about casting parts and application issues.

Ø Free on-site touring and introduction of our factory

Ø We provide process design and validation for free

Ø We can guarantee on-time delivery of samples and goods

Ø Close follow-up of all orders by special person and keep customers informed timely

Ø All after-sale request will be responded in 24 hours

 

FAQ

1. Are you a manufacturer, trading company or a third party?

We are a manufacturer, founded in 2003.

 

2. Can you provide machined finished parts?

Yes, we have our own machining center, we have machines for different machining process and CNC machining center.

 

3. What is your main casting process?

Our casting technologies include sand casing, investment casting, bonded sand casting etc.

 

4. What’s the minimum wall thickness of the castings you produce?

The minimum wall thickness of the castings we produce is 8mm.

 

5. What’s the maximum weight of castings you can produce?

The maximum weight of castings we can produce is 1.8 tons.

 

6. Can you list the smelting equipment of your company?

We have 3 models of medium-frequency induction furnaces: 0.5 tons, 2 tons and 3 tons


Hot Tags: stainless steel mixing paddle casting parts, manufacturers, suppliers, price

Feedback

Products List
Contact Us

Tel: +8613861777146
+8615852600207
Fax: 86-510-85992265
E-mail: Vivian@ltzz.com